QoS troubleshooting
We covered verifying QoS in Chapter 6, using the show run tenant TenantA application TenantA_AP1 epg TenantA_EPG1
 command to find which QoS policy map is applied to the tenant and then show run tenant TenantA policy-map type qos TenantA-QoSPolicy
 to look at the policy settings. In this recipe, we will look at a couple more commands.
How to do it...
We can also check from the GUI whether the QoS policy has been applied.
- Navigate to
Tenants
|TenantA
|Application Profiles
|TenantA_AP1
|Application EPGs
|TenantA_EPG1
. - Confirm that the correct QoS policy is set under
Custom QOS
.
There's more...
Other commands that may come in useful are as follows:
show copp policy
This command will show the Control Plane Policing (CoPP) settings:
ACI-leaf1# show copp policy
COPP Class COPP proto COPP Rate COPP Burst
ifc ifc 50005000
igmp igmp 15001500
cdp cdp 1000...