A scenario using a VxRail vSAN two-node cluster

This section will discuss a sample configuration of a VxRail vSAN two-node cluster, as shown in Figure 6.10. We will discuss a scenario of central management and witness on the VxRail vSAN two-node cluster, including network configuration and software and hardware requirements. In Figure 6.10, there are two separate locations, the Main Data Center and the Remote Office. vCenter Server and vSAN Witness are installed in the main data center, and two VxRail E660 appliances (VxRail Node 1 and VxRail Node 2) are installed in the remote office:

Figure 6.10 – Sample configuration of a VxRail vSAN two-node cluster

If you choose this deployment of the VxRail vSAN two-node cluster in this scenario, it must fulfill the following requirements:

• There are four 10 Gb ports on each VxRail E660.
• The vSAN witness and vCenter Server are installed in the main data center.
• The VLAN ID of vCenter Server and the...