Requirements

For this project, you will need the hardware and tools. Here is the list of the hardware required:

• The Raspberry Pi

• A USB keyboard (for setup only)

• Arcade buttons and a joystick

• A monitor (and an HDMI adapter if needed)

• A sheet of 6 mm plywood (see the Building the cabinet section for the size required)

• A sheet of 12 mm plywood ( see the Building the cabinet section for the size required)

• Female-to-female 0.1 inch pin jumpers

Tools required for this project are listed as follows:

• A soldering iron and solder

• Wire cutters

• A Pozidriv screwdriver

• A drill machine

• A 30 mm Forstner drill bit

• Sandpaper (80, 120, and 240 grit)

• A jigsaw