Technical requirements
The following are required to complete the chapter:
- Any late model Windows, macOS, or Linux computer that can install OpenSCAD and Inkscape.
- A 3D printer with PLA – any FDM printer should work, however, the Creality Ender 3 V2 is the printer used for our example.
- 4 X M3 10mm bolts
- A 3mm drill tap for making threaded holes, as shown here:
Figure 8.1 – 3mm drill tap
- M10 nylon cap nuts or another type of M10 nut, as shown here:
Figure 8.2 – M10 nylon cap nuts
The code and images for this chapter can be found here: https://github.com/PacktPublishing/Simplifying-3D-Printing-with-OpenSCAD/tree/main/Chapter8.
