Requirements
For this project, you will need the hardware and tools. Here is the list of the hardware required:
- The Raspberry Pi
- A USB keyboard (for setup only)
- Arcade buttons and a joystick
- A monitor (and an HDMI adapter if needed)
- A sheet of 6 mm plywood (see the Building the cabinet section for the size required)
- A sheet of 12 mm plywood ( see the Building the cabinet section for the size required)
- Female-to-female 0.1 inch pin jumpers
Tools required for this project are listed as follows:
- A soldering iron and solder
- Wire cutters
- A Pozidriv screwdriver
- A drill machine
- A 30 mm Forstner drill bit
- Sandpaper (80, 120, and 240 grit)
- A jigsaw
