Responding to a button
Many applications using the Raspberry Pi require that actions be activated without a keyboard and screen attached to it. The GPIO pins provide an excellent way for the Raspberry Pi to be controlled by your own buttons and switches without the need for a mouse/keyboard and screen.
Getting ready
You will need the following equipment:
2x DuPont female to male patch wires
Mini breadboard (170 tie points) or a larger one
Push button to make a switch and momentary switch (or a wire connection to make/break the circuit)
Breadboarding wire (solid core)
1k ohm resistor
The switches are as seen in the following diagram:
The push button switch and other types of switches
Note
The switches used in the following examples are single pole single throw (SPST) momentary close push button switches. Single pole (SP) means that there is one set of contacts that makes a connection. In the case of the push switch used here, the legs on each side are connected together with a single pole switch in...
