Taking measurements
Before opening Blender, some measurements must be gathered. Careful measurements need to be taken of the ring finger and an SD card. A digital caliper is an excellent tool to take measurements with, as shown in the following figure:
My middle finger measures 19.3 mm at the widest point. If a digital caliper is not available, another way of measuring your finger is to wrap a piece of paper around the finger, mark where it overlaps, and use a ruler to find your finger's circumference, like this:
Then, consult the following table to find out the standard ring size and diameter:
|
Circumference (mm) |
Circumference (in) |
Diameter (mm) |
Radius (mm) |
US standard ring size |
|---|---|---|---|---|
|
1.94 |
49.3 |
15.7 |
7.85 |
5 |
|
2.04 |
51.9 |
16.51 |
8.25 |
6 |
|
2.14 |
54.4 |
17.32 |
8.66 |
7 |
|
2.24 |
57 |
18.14 |
9.07 |
8 |
|
2.34 |
59.5 |
18.95 |
9.47 |
9 |
|
2.44 |
62.1 |
19.76 |
9.88 |
10 |
|
2.54 |
64.6 |
20.57 |
10.28 |
11 |
|
2.65 |
67.2 |
21.39 |
10.69 |
12 |
|
2.75 |
69.7 |
22.2 |
11.1 |
13 |
|
2.85 |
72.3 |
23.01 |
11.50 |
14 |
|
2.95 |
74.8 |
23.83 |
11... |
