Let's analyze the topology. First thing notice the hardware we have layer 2 and a router which will be doing the routing, obviously. Second thing, it is not the typical Laz network. You now have the networks, which are subnetted, but I did not put the NetID toward the root switch. We will have to consider that. Also, it states that all native VLANs will be in 100, so we need to make those changes and then we need to worry about the routing between all these networks and secure them. Let's look at the following diagram:
I already put the IP addresses on the PCs, but remember that all networks are subnetted, so be careful when assigning the addresses; we also have email servers, and a web and TFTP server, so you need to configure those as well.
Let's proceed step by step. Let's look at the PCs and IP configurations:
We have the correct...
