What do you get with Print?

Instant access to your digital eBook copy whilst your Print order is Shipped

Paperback book shipped to your preferred address

Download this book in EPUB and PDF formats

Access this title in our online reader with advanced features

DRM FREE - Read whenever, wherever and however you want

Raspberry Pi Android Projects

Chapter 1. Make a Remote Desktop Connection to Your Pi from Anywhere

In this project, we will make a gentle introduction to both Pi and Android platforms to warm us up. Many users of the Pi face similar problems when they wish to administer it. You have to be near your Pi and connect a screen and a keyboard to it. We will solve this everyday problem by remotely connecting to our Pi desktop interface. The chapter covers following topics:

Prerequisites
Installing Linux in your Pi
Making necessary changes in settings
Installing necessary components in the Pi and Android
Connecting the Pi and Android

Installing Linux on your Pi

We will use Raspbian as the operating system on our Pi. My choice is solely based on the fact that it is recommended by the Raspberry Pi Foundation. It is based on the Debian version of Linux and optimized for Raspberry Pi hardware. Apart from being the most used operating system for Raspberry Pi, it contains almost 35,000 packages, such as games, mail servers, office suite, internet browsers and so on. At the time of writing this book, the latest release was dated May 5, 2015.

There are two main ways of installing Raspbian. You can either use the OS image as a whole or you can begin with an easy-to-use tool-operating system bundle called NOOBS. We will cover both cases here.

Note

There are SD cards for sale with NOOBS or Raspbian already installed. It might be a good idea to get one of these and skip the OS installation part of this chapter.

However, before we begin, we might need to format our SD card as previous OS installations may corrupt the card. You'll notice this if only a fraction of free space on the card is shown to be available even though you have formatted the card using the formatting utility provided by your computer's OS. The tool we will use is called the SD Formatter and is available for Mac and Windows from SD Association at https://www.sdcard.org/downloads/formatter_4/index.html. Install and start it. You will see the following interface asking you to select the SD card location:

The SD Formatter interface

Installing using NOOBS

The latest version of NOOBS can be found at http://downloads.raspberrypi.org/NOOBS_latest. Download and extract the contents on to the SD card. Attach the card to your Pi and connect it to a screen using an HDMI cable. Do not forget to connect the USB mouse. When the Pi is attached to a power source, you will be presented with a list of choices you can make. Check the Raspbian installation option on the list, and then click on Install. This will install Raspbian on your SD card and restart the Pi.

Installing using a Raspbian image

The latest version of the Raspbian OS can be found at http://downloads.raspberrypi.org/raspbian_latest. The ZIP file is almost 1 GB in size and contains a single file with an .img extension, which is 3.2 GB in size. Unzip the contents and follow the steps in the next section to extract it to a suitable microSD card.

Extracting the OS image to an SD card

To extract an image file, we need a disk imaging utility and we will use a freely available one called Win32 Disk Imager on Windows. It can be downloaded at http://sourceforge.net/projects/win32diskimager/. On Mac OS, there is a similar tool called ApplePi Baker available at http://www.tweaking4all.com/hardware/raspberry-pi/macosx-apple-pi-baker/. Download and install it on to your computer. The installation will contain an executable file, Win32DiskImager, which you should start in the administrator mode by right clicking on it and selecting Run as administrator.

In the Win32 Disk Imager window, you should choose the image file you've extracted and the drive for SD card similar to what is shown in the following screenshot:

The Win32 Disk Imager window

Clicking on the Write button will start the process and your SD card will be ready to be inserted into the Pi.

Installing necessary components in the Pi and Android

As the following screenshot shows the LXDE desktop manager comes with an initial setup and a few preinstalled programs:

The LXDE desktop management environment

By clicking on the screen image on the tab bar located at the top, you will be able to open a terminal screen that we will use to send commands to the Pi.

The next step is to install a component called x11vnc. This is a VNC server for X, the window management component of Linux. Issue the following command on the terminal:

sudo apt-get install x11vnc

This will download and install x11vnc to the Pi. We can even set a password to be used by VNC clients that will remote desktop to this Pi using the following command and provide a password to be used later on:

x11vnc –storepasswd

Next, we can get the x11vnc server running whenever the Pi is rebooted and the LXDE desktop manager starts. This can be done through the following steps:

Go into the .config directory on the Pi user's home directory located at /home/pi:
```
cd /home/pi/.config
```
Make a subdirectory here named autostart:
```
mkdir autostart
```
Go into the autostart directory:
```
cd autostart
```
Start editing a file named x11vnc.desktop. As a terminal editor, I am using nano, which is the easiest one to use on the Pi for novice users, but there are more exciting alternatives, such as vi:
```
nano x11vnc.desktop
```
Add the following content into this file:
```
[Desktop Entry]
Encoding=UTF-8
Type=Application
Name=X11VNC
Comment=
Exec=x11vnc -forever -usepw -display :0 -ultrafilexfer
StartupNotify=false
Terminal=false
Hidden=false
```
Save and exit using (Ctrl+X, Y, Enter) in order if you are using nano as the editor of your choice.
Now you should reboot the Pi to get the server running using the following command:
```
sudo reboot
```
After rebooting using the sudo reboot command, we can now find out what IP address our Pi has been given in the terminal window by issuing the ifconfig command. The IP address assigned to your Pi is to be found under the eth0 entry and is given after the inet addr keyword. Write this address down:
Example output from the ifconfig command
The next step is to download a VNC client to your Android device.
In this project, we will use a freely available client for Android, namely androidVNC or as it is named in the Play Store—VNC Viewer for Android by androidVNC team + antlersoft. The latest version in use at the writing of this book was 0.5.0.
Note
Note that in order to be able to connect your Android VNC client to the Pi, both the Pi and the Android device should be connected to the same network—Android through Wi-Fi, and Pi through its Ethernet port.

Connecting the Pi and Android

Install and open androidVNC on your device. You will be presented with a first activity user interface asking for the details of the connection. Here, you should provide Nickname for the connection, Password you enter when you run the x11vnc –storepasswd command, and the IP Address of the Pi that you found out using the ifconfig command. Initiate the connection by pressing the Connect button, and you should now be able to see the Pi desktop on your Android device.

In androidVNC, you should be able to move the mouse pointer by clicking on the screen and under the options menu in the androidVNC app, you will find out how to send text and keys to the Pi with the help of Enter and Backspace.

Note

You may even find it convenient to connect to the Pi from another computer. I recommend using RealVNC for this purpose, which is available on Windows, Linux, and Mac OS.

What if I want to use Wi-Fi on the Pi?

In order to use a Wi-Fi dongle on the Pi, first of all, open the wpa_supplicant configuration file using the nano editor with the following command:

sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

Add the following to the end of this file:

network={
    ssid="THE ID OF THE NETWORK YOU WANT TO CONNECT"
    psk="PASSWORD OF YOUR WIFI"
}

Note

I assume that you have set up your wireless home network to use WPA-PSK as the authentication mechanism. If you have another mechanism, you should refer to the wpa_supplicant documentation. LXDE provides even better ways to connect to Wi-Fi networks through a GUI. It can be found on the upper-right corner of the desktop environment on the Pi.

Connecting from anywhere

Now, we have connected to the Pi from our device, which we need to connect to the same network as the Pi. However, most of us would like to connect to the Pi from around the world as well. To do this, first of all, we need to now the IP address of the home network assigned to us by our network provider. By going to http://whatismyipaddress.com URL, we can figure out what our home network's IP address is. The next step is to log in to our router and open up requests to the Pi from around the world. For this purpose, we will use a functionality found on most modern routers called port forwarding.

Note

Be aware of the risks contained in port forwarding. You are opening up access to your Pi from all around the world, even to malicious users. I strongly recommend that you change the default password of the user pi before performing this step. You can change passwords using the passwd command.

By logging onto the router's management portal and navigating to the Port Forwarding tab, we can open up requests to the Pi's internal network IP address, which we have figured out previously, and the default port of the VNC server, which is 5900. Now, we can provide our external IP address to androidVNC from anywhere around the world instead of an internal IP address that works only if we are on the same network as the Pi.

Port Forwarding settings on Netgear router administration page

Note

Refer to your router's user manual to see how to change the Port Forwarding settings. Most routers require you to connect through the Ethernet port in order to access the management portal instead of Wi-Fi.

Description

Raspberry Pi is the credit card-sized, general purpose computer which has revolutionized portable technology. Android is an operating system that widely used in mobile phones today both on the high and low ends of the mobile phone market. However, there is little information about how to connect the two in spite of how popular both of them are. Raspberry Pi Android Projects starts with simple projects that help you access the command prompt and the desktop environment of Raspberry Pi from the comfort of your Android phone or tablet. Then, you will be introduced to more complex projects that combine the strengths of the Pi and Android in amazing ways. These projects will teach you how to manage services on the Pi from Android, share files between Android devices using the Pi as a server, administer and view the Pi’s camera from Android in surveillance mode, and connect your car to the Pi and make data more accessible using Android. The introductory projects covered will be useful each time you need to access or administer your Pi for other purposes, and the more advanced projects will continue to be valuable even after you become an expert on Pi. By the end of this book, you will be able to create engaging and useful projects that will help you combine the powers of both Android and Raspberry Pi.

What do you get with Print?

Instant access to your digital eBook copy whilst your Print order is Shipped

Paperback book shipped to your preferred address

Download this book in EPUB and PDF formats

Access this title in our online reader with advanced features

DRM FREE - Read whenever, wherever and however you want

Frequently bought together

Building a Home Security System with Raspberry Pi

€29.99

€29.99

Raspberry Pi Home Automation with Arduino - Second Edition

€24.99

Total € 84.97

Carles Nov 12, 2015

Another useful book to dust off that raspberry pi you have sitting on a shelf or go beyond lighting some leds with it.This title adds a new dimension to the myriad of existing ones by pairing the pi with and android phone to boost its capabilities. Don't get it wrong, you are not installing Android SO inside the pi but just the usual raspbian linux distribution. Keep that in mind before getting this book. If you are in search of that specific scenario, give it a look to all the other titles PACKT has into the matter that may suit you best.To get the most of this book it's advisable you have a little background in electronics (you'll tinker with some simple electronic components, sensors, leds and so on) and also some programming background (C, java or PHP will be enough to follow books examples).From this point the book will guide you through different real-life projects with a very practical, less theoretical, approach (winner way to learn imho) using the strong multimedia and IoT capabilities present on the Raspberry Pi 2 and today's smartphones.

Amazon Verified review

Perry Nally Dec 14, 2015

This book covers exactly what you need to know and do in order to use an android smart phone (or even android stick) to communicate via wi-fi or bluetooth with the pi 2. All the Linux and Android commands are given to setup a truly usable environment for creating a great IoT devices. This book goes a bit further by helping you understand what issues you may have and how to overcome them or gives extra resources if it's outside the scope of the book. I learned how to remote manage the pi from android, install, configure, and manage mysql database, a webserver, read from GPS and a temperature/humidity sensor, and how to connect the pi to your car OBD-II and stream that data to a google doc spreadsheet using your phone as a mobile hotspot. It also includes the basic things like installing a media center, a file server, and a security camera. But the meat of connecting it all up is the car data logger. In order to do the reading and streaming from Android, you get to create an Android App using Android Studio.This book may not be for everyone since the scenarios are so specific. For instance, I may not want Android to communicate with the pi through wi-fi or bluetooth, but some other connection. You'll need to figure out how to connect via a hard-wire/usb/other device on your own.However, though I wish there were more chapters to this book related to other connection methods between the pi and Android, I found it still very comprehensive for the tasks it was attempting to teach me. You can literally sit down and follow the examples word for word (you may need to be a bit creative if you're not using the same hardware/software versions) and have usable environments. I love that this book is so hands on and not so much theory.

Raspberry Pi Android Projects: Create exciting projects by connecting the Raspberry Pi to your Android phone

What do you get with Print?

Raspberry Pi Android Projects

Chapter 1. Make a Remote Desktop Connection to Your Pi from Anywhere

Prerequisites

Installing Linux on your Pi

Note

Installing using NOOBS

Installing using a Raspbian image

Extracting the OS image to an SD card

Making necessary changes in settings

Installing necessary components in the Pi and Android

Note

Connecting the Pi and Android

Note

What if I want to use Wi-Fi on the Pi?

Note

Connecting from anywhere

Note

Note

Problems with dynamic LAN IP addresses and external IP addresses

Summary

Page 1 of 8

Description

Who is this book for?

Product Details

What do you get with Print?

Product Details

Frequently bought together

Table of Contents

Customer reviews

People who bought this also bought

About the author

FAQs

Raspberry Pi Android Projects: Create exciting projects by connecting the Raspberry Pi to your Android phone

What do you get with Print?

Contact Details

Shipping Address

Billing Address

Note

Description

Who is this book for?

Product Details

What do you get with Print?

Contact Details

Shipping Address

Billing Address

Product Details

Packt Subscriptions

Frequently bought together

Table of Contents

Customer reviews

People who bought this also bought

About the author

FAQs