The first step in setting up your remote computer for development with the Galileo is to download the Integrated Development Environment (IDE) software from https://communities.intel.com/docs/DOC-22226. Choose the download link for Windows. This will download the IDE as well as the drivers for the Galileo. When this file is downloaded, unzip the file using an archive manager (for example 7-zip) to a location on your C:. This will un-archive a set of files and directories under the arduino-1.5.3-Intel.1.0.3 directory structure.

Plug the USB from the Galileo into your computer. If you are using a newer version of Microsoft Windows, when you plug the Galileo into the system it will try to install the drivers automatically. The device will fail to install. You'll need to install the drivers manually, using the following steps:

You will get a security warning; click on OK and the drivers will install. When your drivers are installed, you should see the following device when you navigate to Start Menu | Devices and Printers:

In this case, the device is connected to COM port 34. Note down the COM port the Galileo is connected to as you'll need that in a minute.

If you are using an OS X machine, download the OS X version of the IDE software at https://communities.intel.com/docs/DOC-22226. Unzip this file into your Applications folder. Then connect the 5V power to the Galileo. Connect the USB cable from the Galileo to an available USB socket on your computer. Wait for a minute while the Galileo boots up. To verify that the Galileo has loaded properly, open the System Information window. Then check under the USB tab for a Gadget Serial v2.4 entry as demonstrated in the following screenshot:

You should also check under the Network tab to find the device name of your Galileo. It should be something like usbmodemXXXX. Note down this name as you will need it to select the correct port later when you configure the connection to the Galileo. You are now ready to run the software.

If you are using a Linux machine, download the Linux version of the IDE software from https://communities.intel.com/docs/DOC-22226. Unpack this file using tar -zxvf arduino-1.5.3-linux32.tar.gz. You will also need to disable the modem manager on most Linux distributions to enable uploading to the board. How you do this will vary by distribution but, if you are using the Ubuntu distribution, type sudo apt-get remove modemmanager.

To connect the Galileo board to the Linux machine, simply plug in the USB connector to one of the USB ports on the Linux machine. Open a terminal and type sudo ls /dev/ttyACM* and this will list the device connected to the machine. You should note down this value as you will later need to specify the port.

Now that the device is installed, you can run the IDE. Select and run the program based on the type of machine you are using. The IDE should start and you should see something resembling the following screenshot:

This is the environment you will use to develop your applications. You can use this IDE to compile the code, upload it to the device, and then run it.

Setting the IDE to connect to your board

The first thing you'll need to do is set the IDE to create code for the proper Galileo board. Fortunately, the IDE lets you set that by choosing the board. To do this, navigate to Tools | Board | Intel® Galileo Gen2, as shown in the following screenshot:

The next step, selecting a port to connect the board to the IDE, will depend on the type of operating system you are using.

Selecting the proper COM port for Windows

To specify the port for Windows, navigate to Tools | Serial Port | COM23, (the port you noted earlier) as shown in the following screenshot:

The IDE should now indicate that you are using the Galileo on COM23 in the lower-right corner of the IDE, as in the preceding screenshot.

The first thing you'll want to do is update the firmware on the Galileo. To do this, select Help | Galileo Firmware Update, as shown in the following screenshot:

Having the latest firmware is always a good idea; you might want to repeat this step every week or so just to make sure you have the latest.

Opening and uploading a file to the Galileo

Now that your board is connected and you are running the latest firmware, you can open and upload a simple example file. It is called the blink application. It has already been written for you, so you won't need to do any coding.

To get the blink application, perform the following steps:

1. Navigate to File | Examples | 01.Basics | Blink, as shown in the following screenshot:
   
2. You should then see the Blink code in the IDE window, as in the following screenshot:
   
3. Select the Upload button, as in the following screenshot:
   
4. Once you have uploaded the file, it will tell you in the lower-left corner of the IDE display that the file is uploaded, as in the following screenshot:
   

When the program is uploaded, it will automatically start running and the green LED that is positioned close to the USB connection on the Galileo will start blinking. The following images shows the LED:

You have now successfully uploaded your first program to your Galileo!

There are several differences between the Galileo and the more common Arduino board that many of you might be familiar with. The Galileo has significantly more processing power. However, it also starts up into a Linux operating system, and then exposes its programming environment in an Arduino-like interface. While you'll almost exclusively use the Arduino IDE interface in this book, you can also access the Linux capabilities of the Galileo. You'll learn more about this in Chapter 7, Going Further with Galileo.

You've completed the next stage of your journey. You have your Galileo up-and-talking with your external computer, and know how to connect to the IDE to create code. Your next step will be learning how to access the GPIO pins so that you can interact with the outside world.