Building the scorpion's exoskeleton
You will now use many of the white elements typically used for vehicles and robot body designs to create the look of a scorpion. Additionally, these pieces help secure the build and hide wires underneath to give the build a sleeker look. You will notice there are some wire clips used on the sides of the Intelligent Hub, so be sure to use these as you build to hide as much of the wire as you can.
You will now finish up the frame of the robot by adding the head and some structural elements before moving into the final details of the build.
You will need the following pieces:
- One white 13L beam
- Eight black connector pins
- Two white panels
- Four white pins with friction ridges
- One curved white panel
- One small curved white panel
- Two gray connector pins with bush stops
- Two red axle pins
- Two teal round axle connectors
Begin by adding a black connector pin to each end of the 13L beam. Attach this...
