The basic setup

The basic setup for OpenVPN in tap mode is almost exactly the same as in the tun mode. In tap mode, we use the following line in the server configuration file:

dev tap

While in tun mode, we use the following lines:

dev tun
topology subnet

The option topology subnet is not required, but provides a network addressing scheme that is more sensible and will be the default in a future version of OpenVPN.

For the sake of completeness, we first create the server configuration file:

proto udp
port 1194
dev tap
server 10.222.0.0 255.255.255.0

persist-key
persist-tun
keepalive 10 60

remote-cert-tls client
tls-auth /etc/openvpn/movpn/ta.key 0
dh       /etc/openvpn/movpn/dh2048.pem
ca       /etc/openvpn/movpn/movpn-ca.crt
cert     /etc/openvpn/movpn/server.crt
key      /etc/openvpn/movpn/server.key

user  nobody
group nobody

verb 3
daemon
log-append /var/log/openvpn.log

We will reuse this basic tap-mode server configuration file in this chapter and others. Save it as tap-udp-server.conf so...