Building the body of the dragster
To begin the build of the rest of the body of the dragster, you will work on the opposite end to where the gears are located:
- Add an azure 7L beam across the medium motors using two black connector pins:
Figure 6.11 – Building brace across motors
- Connect a purple 7x11 open frame to the azure 7L beam you installed in the preceding step using two black connector pins:
Figure 6.12 – Adding an open frame to the build
- Add another purple 7x11 open frame to the dragster body using another two black connector pins:
Figure 6.13 – Adding a second open frame to the build
- Connect an azure 7L beam to the end of the second purple 7x11 open frame using two black connector pins:
Figure 6.14 – Adding a beam across the open frame
- Rotate your dragster so that you can see underneath the robot and locate where the purple 7x11 open frame connects to the main frame of the robot. Secure these together using two black T beams, connecting...