Mastering Kali Linux Wireless Pentesting: Test your wireless network's security and master advanced wireless penetration techniques using Kali Linux

What do you get with Print?

Instant access to your digital copy whilst your Print order is Shipped

Paperback book shipped to your preferred address

Redeem a companion digital copy on all Print orders

Access this title in our online reader with advanced features

DRM FREE - Read whenever, wherever and however you want

Mastering Kali Linux Wireless Pentesting

Chapter 1. Wireless Penetration Testing Fundamentals

Before you begin to scan, inject, crack, sniff, spoof, and DoS (Denial of Service) wireless networks, it helps to have an understanding of the fundamentals of conducting a wireless assessment. You should have an understating of the equipment you will need, the environment where the assessment will occur, and the basics of the regulatory standards for wireless communication. This book is a collection of practical applications that tell you how one would go about actually testing the security of wireless networks. It should be mentioned upfront that it is intended to provide some guidance for wireless security professionals and those who are looking to learn what it takes to attack and defend against wireless threats. It probably goes without saying, however, that before you proceed to try any of what you are about to learn against a production network, or any equipment you do not own, you must get written permission from the organization or individual you are providing the wireless assessment for. Unauthorized wireless cracking, traffic capture, or any other attacks that will be presented are a good way to find yourself in hot water and are not condoned or intended by the authors or the publisher of this content. This chapter will set the stage and help guide you through the basics of wireless communication, selecting the hardware that will provide you with all of the functionality required to conduct a wireless pentest, the procurement and installation of Kali Linux, the security professional's distribution of choice, and finally, validating that our configuration is sound and supports all of the tools we will be using throughout this publication.

We will cover the following topics in this chapter:

Wireless terminology and standards
Wireless adapters and antennas
Kali Linux installation and configuration
Configuration validation

Wireless communication

The term wireless can be construed in many different ways depending on who you are speaking to. In general, this can encompass any transmission of data using a technology where the sender and the receiver of the data are not connected by a physical medium. From an information technology context, this will cover technologies such as microwave, cellular, mobile broadband, Bluetooth, LoRa, Zigbee, and of course, Wi-Fi, or Wireless Fidelity. While some of the other areas of wireless are intriguing from a security perspective, we have chosen to keep the scope of this book down to only Wi-Fi technologies. This section will discuss the basics of Wi-Fi communications and the protocols and standards at a level appropriate for security professionals. Thankfully for us, we are able to benefit from lots of work done by our electrical engineering and software engineering counterparts, who have reduced the complexity of magically sending packets through the air at great speeds down to something manageable.

Let's start by discussing the wireless LAN networking technology defined by the IEEE 802.11 working group. Wireless Local Area Networks, typically referred to simply as WLANs, are very popular technologies that are used to create a network of clients and devices that do not require each host to be connected to the network via a wired Ethernet connection. The biggest advantages of WLANs are their ease of use, low cost of deployment, and dynamic operational model. As mentioned, WLANs are easy to deploy, and even home users can buy an access point and start networking it with available mobile devices, such as laptops, smartphones, and tablets, with little skill and in a short amount of time. It's typically just a matter of plugging in the access point and correctly configuring your mobile devices, and the WLAN will be operational within a few minutes. For WLANs in a corporate environment, many of the same principles apply, though the complexity and security considerations will typically increase linearly to the size of the deployment. Organizations typically have many access points and configurations to manage, and it's common to see them deployed, leveraging a controller model to ensure consistency. While this model varies from what you will typically see in a residential or SMB scenario, the underlying technologies (and weaknesses) still exist. To better understand the security risks associated with WLANs, we need to know how wireless stations and clients communicate and the underlying technologies that enable this communication.

Some WLAN components are as follows:

Radio: This is defined as a station in 802.11 standards, and it will sometimes be abbreviated as STA. It is the component that transmits the wireless signal.
Access Points (AP): This provides connectivity between STAs (most likely, laptops and other mobile devices).

The preceding components alone provide the hardware required to build a WLAN. From a software perspective, wireless drivers and firmware on access points enable this hardware, and an operating system and an application stack will provide the management, user control, encryption, and other functionalities.

As we look at the security considerations for each part of the stack that enables wireless connectivity, we have to ensure that all components are scrutinized. It is possible that vulnerabilities in something as fundamental as device drivers may lead to the compromise of the AP or client. Additionally, firmware in an access point can potentially be infected with malware, which can lead to the compromise of the clients that are connected to them. If you are a security professional reading this book, to be better informed and better understand how to test and protect a wireless network you are responsible for, subsequent chapters will provide you with some guidance on known vulnerabilities, what to look out for, and operational best practices in addition to the demonstrated penetration testing exercises.

Wireless standards

The Wi-Fi Alliance (www.wi-fi.org) is an organization that supports and certifies wireless technologies to ensure interoperability between vendors, and it has been instrumental in bringing Wi-Fi to homes and businesses around the world. Early implementations of wireless technologies for network communications were hampered by interoperability issues and conflicting implementations because the IEEE did not have the testing equipment to ensure compliance with its standards. This led to the creation of the Wireless Ethernet Compatibility Alliance, or WECA, who were promoting a new higher speed standard for wireless communication, which ultimately became 802.11b. WECA was rebranded in 2002 as the Wi-Fi Alliance continues to validate and certify wireless technologies until this day in order to ensure interoperability and promote standards in the industry. Today, wireless networking technologies used to implement WLANs (Wireless Local Area Networks) are organized under the IEEE 802.11 specifications. They are an alphabet soup of protocols that define the frequencies, transmission rates, bandwidth, and modulation of the wireless communications. The following is a list of the protocols we will be focusing on in this book and those that are the most relevant to wireless security professionals:

Protocol	Frequency	Bandwidth	Maximum data rate	Modulation
802.11b	2.4 GHz	22 MHz	11 Mbps	DSSS
802.11a	5 GHz	20 MHz	54 Mbps	OFDM
802.11g	2.4 GHz	20 MHz	54 Mbps	OFDM
802.11n	2.4 or 5 GHz	20 or 40 MHz	150 Mbps	OFDM
802.11ac	5 GHz	20, 40, 80, or 160 MHz	866.7 Mbps	OFDM

In the preceding table, DSSS indicates Direct-Sequence Spread Spectrum, and OFDM is Orthogonal Frequency-Division Multiplexing. These technologies refer to how the radio allocates the bandwidth to transmit the data over the air. Again, a big thanks to wireless engineers for incorporating this complexity into a standard so that we don't necessarily need to know exactly how this works in order to send and receive packets wirelessly.

As we get into wirelessly capturing packets from the air, the concept of channels will come into play. The term channel refers to a specific frequency within either the 2.4 GHz or 5 GHz frequency spectrum that the wireless radios on the access point and the client have either negotiated or been told to use for the communication of the data between them. This is similar to the channel on your television set—think analog here—where the station transmits at a specific frequency and the television is configured to receive that specific frequency by you tuning it to a specific channel. If both sides are configured to talk on the same channel, then the communication between the two devices can proceed. A side note: there is an entirely tangential discussion we could launch into here about the channel selection, co-channel interference, and channel design, but for the purposes of this discussion, we will focus on the channels available in each range and the frequency on which they run. This is explained in detail in the next section.

The 2.4 GHz spectrum

The 2.4 GHz spectrum is commonly used for wireless deployments due to its range and support for many common Wi-Fi protocols, such as 802.11b, g, and n. You will typically find it used either exclusively in your target network or as a co-resident with the 5 GHz spectrum in dual-mode access points. The following table lists the channels and associated frequencies that you will encounter when you conduct your wireless penetration test. We will be using these channel numbers in the subsequent chapters as we set up our captures and define channels for our virtual access points.

Channel	Frequency (MHz)
1	2412
2	2417
3	2422
4	2427
5	2432
6	2437
7	2442
8	2447
9	2452
10	2457
11	2462
12	2467
13	2472
14	2484

In North America, only channels 1-11 are used, while in most of the world, 1-13 are used. Channel 14 is only used in Japan under the 802.11b protocol. These same channels apply whether your wireless interface is using 802.11b, 802.11g, or 802.11n. In the next chapter, when we look at wireless scanning, you will be able to see which channel the access point and client are communicating on using the airmon-ng application. You will then proceed to specifically select one of these channels when we want to capture the traffic being sent between the wireless devices.

The 5 GHz spectrum

The 5 GHz spectrum is massive and varies widely in its implementation depending on which part of the world it is operating in. Fundamentally, it ranges between Channel 36 at 5180 MHz and Channel 165 at 5825 MHz; however, some parts of the world use frequencies ranging down to 4915 MHz, and channels range from 7 to 196. The most common channels and frequencies are represented in the following table. However, you should reference the standards that are in use in your geography before conducting a wireless security assessment as the range might be expanded in your area.

Channel	Frequency (MHz)
36	5180
40	5200
44	5220
48	5240
52	5260
56	5280
60	5300
64	5320
100	5500
104	5520
108	5540
112	5560
116	5580
132	5660
136	5680
140	5700
149	5745
153	5765
157	5785
161	5805
165	5825

The same principles come into play when you are capturing the traffic from the 802.11a or 802.11n networks running at 5 GHz, as they do at 2.4 GHz. The tools provided by Kali will let you specify the frequency your wireless adapter is listening on by the associated channel number. You will identify the channel that the client and access point are communicating over and then set up your capture accordingly.

Choosing the right equipment

Though you may be eager to grab a laptop, install Kali on it, and jump right into running the tools, you'd be best served to spend some time researching and validating the devices you plan to use. It can be very frustrating to begin working through the tutorials and exercises in this book only to be thwarted by hardware that is not working right or doesn't support all of the features required to complete your assessment. This section will discuss wireless adapters, antennas, and other considerations that provide you the best chance of success.

Supported wireless modes

In this book, we will extensively make use of the advanced features of the wireless client that are not supported on all adapters. Two of these features, monitor and master modes, will help us capture the traffic and set up virtual access points, respectively. In the monitor mode, you are able to put your wireless adapter in a promiscuous (or listening) mode, which is capable of capturing the wireless frames from the air, while the master mode is essential for the setting up of an evil twin attack. These two modes are just some of the several supported modes in various wireless adapters, and the following are the commonly available modes and they explain what they are used for:

The managed mode: This is the default mode for most wireless connections. In this mode, the wireless adapter is only capable of receiving packets from SSIDs that it is associated with. For instance, if the adapter is associated with a "packt" SSID, then it filters out packets from the other SSIDs. This is the common operating mode for clients who are actively associated with an access point and assigned an IP address and who carry on regular communications with their intended wireless network.
The ad-hoc mode: This mode is rarely used since the majority of wireless networks participate in infrastructure mode and host clients directly. This mode is used only when an access point is not in place and clients are participating in a peer-to-peer mesh. The lack of an access point usually restricts the functionality and usefulness of the connecting clients and hence is rarely used in modern deployments.
The master mode: This mode allows us to configure our wireless client as a base station or a wireless access point. In most production networks, clients are clients and access points are access points. This seems funny to say, but as a penetration tester, it is common for us to want to emulate an access point where we control the configuration and, more importantly, have visibility about all of the traffic traversing the wireless device. This mode is required if you intend to set up a virtual access point as part of your assessment.
The monitor mode: The support for this mode is essential if you want to be able to capture all the traffic on the wireless spectrum. With the monitor mode, the wireless adapter is placed into a passive state, where it does not attempt to interact with any of the wireless devices around it. Instead, it enables us to sniff and capture the traffic for analysis, cracking, or decryption.

As mentioned, not all devices support all four of the preceding modes, notably missing either the monitor mode or the master mode. These two modes are important to many of the provided examples, and it might not be immediately clear that your chosen adapter does not support them. Next, we will discuss adapters that have been known to be successful in penetration tests, specifically with Kali Linux.

Wireless adapters

The first thing you'll look for when selecting a wireless adapter is the chipset used in the adapter. Many adapters may have different vendors and names printed on the outside of the device but use the same chipsets underneath the plastic where it really matters. The chipsets that have been known to be compatible are discussed in the upcoming sections.

Ralink RT3070

This chipset is used in many different USB wireless adapters that are available in different form factors.

The following are examples of several common adapters at the time of writing this book. There are hundred more adapters that also use this chipset, which comes in a variety of sizes and hardware configurations.

This model is ALFA AWUS036NH (image courtesy: http://www.alfa.com.tw)

Interface Type	USB 2.0
Supported Protocols	802.11 b/g/n
Band	2.4 GHz
Speed	150 Mbps
Gain	2000 mW

This model is ALFA AWUS036NEH (image courtesy: http://www.alfa.com.tw)

Interface Type	USB 2.0
Supported Protocols	802.11 b/g/n
Band	2.4 GHz
Speed	150 Mbps
Gain	1000 mW

This model is Tenda UH151 (image courtesy: http://www.tendacn.com)

Interface Type	USB 2.0
Supported Protocols	802.11 b/g/n
Band	2.4 GHz
Speed	150 Mbps

Atheros AR9271

Similar to the RT3070, this chipset also supports 2.4 GHz and is used by several vendors, including ALFA, TP-LINK, D-Link, and others. You will find these adapters regularly recommended by pentesters on Kali and aircrack-ng forums. Here are a few adapters shown along with their specifications.

This model is ALFA AWUS036NHA (image courtesy: http://www.alfa.com.tw)

Interface Type	USB 2.0
Supported Protocols	802.11 b/g/n
Band	2.4 GHz
Speed	150 Mbps

This model is ALFA AWUS036NH (image courtesy: http://www.alfa.com.tw)

Interface Type	USB 2.0
Supported Protocols	802.1 b/g/n
Band	2.4 GHz
Speed	150 Mbps
Gain	2000 mW

Ralink RT3572

This is the newer Ralink chipset, that has been found to be very compatible with Kali Linux, and it supports the modes that we are interested in. This chipset is capable of both 2.4 GHz and 5.0 GHz, making it very attractive for pentesters. A common example that uses this chipset is as follows:

This model is ALFA AWUS051NH (image courtesy: http://www.alfa.com.tw)

Interface Type	USB 2.0
Supported Protocols	802.11 a/b/g/n
Band	2.4 GHz and 5 GHz
Speed	150 Mbps
Gain	500 mW

You will notice that all of the wireless adapters that we recommend in this section have several things in common. First, they all utilize a USB connection rather than being embedded in the device. This is advantageous for a number of reasons. Embedded wireless devices, such as those that ship with your laptop, may have limited advanced functionality support due to driver and firmware limitations. Most pentesters will also use USB devices because of their portability. The USB wireless adapter can easily be disconnected from your primary penetration testing device and be moved to an alternate platform. We will be covering some of these platforms in the last chapter of the book. USB devices can also be easily mapped through to a virtual machine running on top of their existing operating system. This will be demonstrated later, when we cover the installation of Kali Linux on a VM running in Virtual Box.

Another common trait of these adapters is that they all support an external antenna connected to their radio. On the ALFA USB adapters, the antenna is connected via an RP-SMA, or a Reverse Polarity SubMinature Version A screw-on connection. This is a very common connection for antennas, and it allows you to select an antenna to fit the situation and environment where you are operating. The antenna types vary in their construction and design to optimize either the gain or focus their radio signals in a particular direction, increasing the distance in which they can transmit and receive. The next section will cover several antenna types and detail when each could be used during your wireless assessment.

Antennas

Having the ability to replace the antenna on your wireless adapter, while penetration testing provides you some flexibility on how you conduct your wireless assessment. When testing the target environment, you must be within the RF range of the target network in order to do the majority of your testing. This limits how far away you can be from the physical location where the wireless is being utilized and, sometimes, your ability to be inconspicuous while conducting the testing. Increasing the gain and focusing the power of your wireless adapter may allow you to set up camp in a place that is a little more covert while still being able to see the target network. In this section, we will look at three common antenna choices that can be affixed to the wireless adapters mentioned earlier. Each has their own unique advantages and drawbacks.

Omnidirectional antennas

Omnidirectional antenna, as the name implies, sends and receives wireless traffic in all directions around the circumference of the antenna. The amount of gain provided by these antennas varies between 5 dBi and 14 dBi. This is a great general-purpose antenna and will typically ship with an adapter that allows an external antenna. These antennas can be designed for 2.4 GHz, 5.0 GHz, or both, so ensure what band you will be utilizing and select the antenna that supports it.

Patch antennas

Patch antennas allow you to focus the signal of your wireless interface in a particular direction that can improve the accuracy and range of the transmission over a long distance. The radiation pattern of the antenna only extends from one face of the patch antenna and typically has gains in the 7 dBi to 10 dBi range. This antenna will be beneficial if all of the devices you were testing or capturing from were located in the same direction from your testing location.

Image courtesy: http://www.alfa.com.tw

Yagi antennas

Yagi antennas are highly directional antennas, similar to patch antennas. They tend to be capable of even higher gains than the other two discussed antenna types since their radiation pattern is very focused in a particular direction. It is common to find these types of antennas with 18 dBi or higher gains, which allow you to be further away from the target wireless network you are testing if your directional aim with the antenna is true.

Image courtesy: http://www.alfa.com.tw

Key benefits

Develop your skills using attacks such as wireless cracking, Man-in-the-Middle, and Denial of Service (DOS), as well as extracting sensitive information from wireless networks

Perform advanced wireless assessment and penetration tests

Use Embedded Platforms, Raspberry PI, and Android in wireless penetration testing with Kali Linux

Description

Kali Linux is a Debian-based Linux distribution designed for digital forensics and penetration testing. It gives access to a large collection of security-related tools for professional security testing - some of the major ones being Nmap, Aircrack-ng, Wireshark, and Metasploit. This book will take you on a journey where you will learn to master advanced tools and techniques to conduct wireless penetration testing with Kali Linux. You will begin by gaining an understanding of setting up and optimizing your penetration testing environment for wireless assessments. Then, the book will take you through a typical assessment from reconnaissance, information gathering, and scanning the network through exploitation and data extraction from your target. You will get to know various ways to compromise the wireless network using browser exploits, vulnerabilities in firmware, web-based attacks, client-side exploits, and many other hacking methods. You will also discover how to crack wireless networks with speed, perform man-in-the-middle and DOS attacks, and use Raspberry Pi and Android to expand your assessment methodology. By the end of this book, you will have mastered using Kali Linux for wireless security assessments and become a more effective penetration tester and consultant.

What you will learn

Fingerprint wireless networks with the various tools available in Kali Linux

Learn various techniques to exploit wireless access points using CSRF

Crack WPA/WPA2/WPS and crack wireless encryption using Rainbow tables more quickly

Perform man-in-the-middle attack on wireless clients

Understand client-side attacks, browser exploits, Java vulnerabilities, and social engineering

Develop advanced sniffing and PCAP analysis skills to extract sensitive information such as DOC, XLS, and PDF documents from wireless networks

Use Raspberry PI and OpenWrt to perform advanced wireless attacks

Perform a DOS test using various techniques and tools

What do you get with Print?