What do you get with Print?

Instant access to your digital copy whilst your Print order is Shipped

Paperback book shipped to your preferred address

Redeem a companion digital copy on all Print orders

Access this title in our online reader with advanced features

DRM FREE - Read whenever, wherever and however you want

Internet of things with Intel Galileo

Chapter 1. Introducing Galileo

The Internet of Things (IoT) is a hot topic nowadays. It is a vision where everyday objects are connected, and share data over the Internet. It is believed that it will have a huge impact in our lives by changing the way we interact with the things that are present in our daily lives.

In this context, many development boards have been developed for the makers' community over the last few years. Most of them required some of the essential components to be bought separately, such as the Ethernet socket. Intel offered a different solution packing the most common components together onboard and putting the Arduino and Linux worlds together, all in one board—the Galileo.

In this chapter, you will be able to understand what the concept of the Internet of Things is, what a Thing is, and how Galileo may help you develop your Things.

In this chapter, we'll be covering the following topics:

The Internet of Things vision
Galileo board and its components
Galileo Gen 2
Popular boards comparison

The Internet of Things vision

The Internet of Things concept is neither entirely new nor is a futuristic distant technology. It is being built today with today's technology, and you can find it in some of your own home devices, big data clouds, and sensors. It started with wireless technologies converging progressively with micro-electromechanical systems (MEMS) and the Internet.

The initial concept suggested that it were the persons who should share the data. Today, it can be defined as a network of sensing and actuating devices with the ability to share information.

The first time the term "Internet of Things" was officially used in a publication back in 1999, where Kevin Ashton published his vision in the RFID Journal:

You can't eat bits, burn them to stay warm or put them in your gas tank. Ideas and information are important, but things matter much more. Yet today's information technology is so dependent on data originated by people that our computers know more about ideas than things. If we had computers that knew everything there was to know about things—using data they gathered without any help from us—we would be able to track and count everything, and greatly reduce waste, loss and cost. We would know when things needed replacing, repairing or recalling, and whether they were fresh or past their best. The Internet of Things has the potential to change the world, just as the Internet did. Maybe even more so.

As you can see, devices sharing data is the real concept behind IoT. Such devices could either be living or inanimate. A Thing in the IoT context can be a person wearing a pulse monitor, a dog carrying a tracking device, a garbage bin that notifies it needs to be emptied, or a thermostat that adjust itself automatically to help you lower your electricity bills.

IoT assumes that Things must be uniquely identifiable and able to gather data recurring to sensors. They must also have the ability to communicate and transfer data over a network. Such data could be used for monitoring purposes, big data processing, or even to control that same Thing.

Things supporting this machine-to-machine communication are usually known as smart devices. An example of a smart device is the famous Google Nest thermostat (https://nest.com/thermostat). Being more than a simple thermostat, it shares its usage data to help you save on your home's energy, while keeping you cozy. It can also work together with other smart devices such as some Mercedes-Benz cars (https://nest.com/works-with-nest/). The car GPS system shares data with the Nest cloud, making it possible to start heating or cooling your home, based on the expected arrival time.

Introducing Intel Galileo

Intel® Galileo is a development board based on Intel x86 architecture; it was designed mostly for makers and complies with open source software and hardware licenses. If you are familiar with the Arduino boards, you'll find this board somewhat similar; the reason being this board was designed to be hardware and software compatible with the Arduino shield ecosystem. It combines Intel technology with support for Arduino shields and libraries. It is even possible to write code using the same Arduino development environment.

The expansion header is similar to the Arduino ones. It has 14 digital I/O pins (where six of them can be used as PWM), six analog inputs, a serial port, and an ICSP header. It supports shields operating at either 3.3 V or 5 V. A jumper on the board enables voltage translation at the I/O pins from 5 V to 3.3 V, and vice versa, providing compatibility with the Arduino shields.

Galileo runs over a very light open source Linux OS in its 8 MB flash memory. However, do take into consideration that Arduino is being emulated using Linux, and your code will be running in a separate process.

This board includes a 10/100 Ethernet connector port, and if you wish to use Wi-Fi, you can add a card to the Mini PCIe socket on the back side of the board.

The Galileo Gen 1 board and its components

Breaking down the board, you can find the following major components:

I2C jumper: This jumper allows you to change the I2C address of some on-board components. You may need to do this if you are using I2C components that conflict with other components on the board.
Ethernet port: This port allows you to connect your board to a wired network, allowing you to communicate with other devices and also access the Internet. If you wish to use Wi-Fi, in the backside of the board, you'll find a Mini PCI Express slot where you can connect your Wi-Fi card. It also enables another possible storage device, USB host, bluetooth, or GSM card.
Serial port: There is a serial port for connecting to the Galileo Linux command line from your computer. Although this port looks like an audio jack, it is only used for serial communication.
USB client: When developing with the Arduino IDE, you'll need to connect your USB cable here, so that you can upload your project's code on the board.
USB host: Do not mistake this port for the USB client. This one is not intended to be used to upload your project's code, but to allow you to connect more peripheral devices, such as webcams and extra storage.
Flash memory: This type of memory is persistent and it is where the board firmware is stored, taking most of the available 8 MB of space.
Random Access Memory (RAM): This is where your sketches are stored while running. Galileo has 512 KB of in-built SRAM and an additional 256 MB of external DRAM. Since it is a volatile type of memory, when you reboot your board, your sketch will be lost. If you wish to keep it persistent, you'll need to save it to a microSD card.
Arduino expansion header: It has 14 digital I/O pins (IO2-IO13, TX, RX); all of them can be used as input or output and six of them can be used as Pulse Width Modulation (PWM) outputs. The RX and TX pins control the programmable speed UART port. At the bottom-right side of the expansion header, you'll find six available analog pins with a 12-bit resolution. The pins at the bottom -left of the board are power pins (IOREF, VIN, RESET, 3.3 V, 5 V, and 2 GND).
VIN jumper: This jumper connects the Galileo VIN pin to the 5 V regulator. When using shields that require more voltage than this, you must pull out this jumper to avoid damaging the board.
IOREF jumper: In order to support 3.3 V shields, you can use this jumper to change your board voltage level from 5 V to 3.3 V.
Reboot button: This button reboots the board, including the OS.
Intel Quark SoC X1000 Application Processor: This is the board's processor; it is responsible for processing your code. It is a 32-bit, single core, single-thread, Pentium (P54C/i586) instruction set architecture (ISA)-compatible CPU. It is capable of operating at speeds up to 400 MHz.
Clock battery power: With this inclusion, you won't need to get the date and time from the Internet every time you reboot your board. By connecting a 3 V coin cell battery to the board, you'll be able to keep track of time, even when the board is powered off.
On board LED: This is an on-board LED, directly connected to the pin 13. You can use it to test and run basic sketches.
JTAG header: This is used to debug boards. It should be used with an in-circuit debugger.
Reset button: Pressing this button will restart your code and send the reset signal to the connected shields. It won't restart the OS.
MicroSD card slot: You'll definitely need more space to store your sketches or other apps. Here, you can insert your microSD card and store your persistent sketches or even use it to boot an operating system instead of the on-board one. You'll need to do this if you want additional functionalities, such as Wi-Fi, since those drivers can't fit in the 8 MB of the board's flash memory. It can be done using a card up to 32 GB.
Power input: This is where you must connect your power adapter. The 5 V, 2A feed is the only official way to power the board. Intel recommends you power the board through its power supply before connecting it via USB to your computer, otherwise, you might damage your board.

As you can see, this board is more suitable to work with sensors. The Arduino shield compatibility, familiar IDE, real-time clock and, possibility of using the PCI express connector are some of its best features.

A comparison of Galileo with the most popular boards

Along with Galileo, Raspberry Pi and Arduino Yún are very popular boards among makers. All of them are Linux-embedded and have open source hardware design.

The following is a table with some features of each board:

Features	Intel Galileo	Arduino Yún	Raspberry Pi model B
CPU speed	400 Mhz	400 Mhz	700 Mhz
Memory	256 MB	64 MB (AR9331) and 2.5 KB (ATmega)	512 MB
Internal storage	8 MB	16 MB (AR9331) and 32 KB (ATmega)	-
External storage	MicroSD	MicroSD	SD card
Networking	Ethernet and Wi-Fi (Wi-Fi adapter is bought separately)	Ethernet and Wi-Fi	Ethernet and Wi-Fi (Wi-Fi dongle is bought separately)
Video output	-	-	HDMI and 1080p composite RCA
Audio output	-	-	HDMI and 3.5 mm audio jack
Digital I/O pins	14 at 3.3 V or 5 V	20 at 5 V	17 at 3.3 V
Analog input	6 (12-bit ADC)	12 (10-bit ADC)	-
PWM output	6	7	1
Real-time clock	Optional	-	-
SPI	1	1	2
I2C	1	1	1

Here's the brief comparison of the boards:

Arduino Yún: At first glance, we can say that Yún and Galileo have more in common than with the Raspberry Pi. The number of available PWM, analog and digital pins make them good boards for projects with sensors. Arduino Yún is compatible with most Arduino Leonardo shields. Although Galileo shares a look alike development environment and board setup, not all the shields are compatible because some of the Arduino libraries are heavily bound to the Arduino architecture. Galileo runs a custom Yocto-based Linux in its 8 MB SPI flash by default. To be able to install stronger tools, it requires to be booted from a microSD card image provided by Intel. Yún runs an OpenWrt distribution, and has 16 MB of space available for the entire operating system. It is not possible to boot load from the microSD card, but is possible to increase its disk space by plugging in a microSD card and configuring it to become the new Linux file system. An advantage of Yún is that it already brings Wi-Fi on its board. Galileo requires connecting a Wi-Fi adapter.
Raspberry Pi: Raspberry Pi, the board with the biggest community, is the only board in our table that has video and audio output, making it more interesting for multimedia projects. However, the lack of analog inputs makes this board less interesting to work with analog sensors.

Galileo is compatible with Arduino in the way that it can run 3.3 and 5 V shields, but it has some restrictions because of the Arduino's AVR libraries dependencies. Before buying a shield, you should check whether it is supported by Galileo.

Some of the advantages of the Galileo board when compared to the mentioned ones are the possibilities of working with PCI Express mini cards and using a real-time clock. Besides these, Galileo comes fully ready to work with sensors; this makes it an interesting tool for data collection.

Like the Raspberry Pi, the possibility of booting from a stronger Linux image makes it possible for projects developed in some of the most popular languages such as Python or Node.js (Javascript).

Description

This book employs an incremental, step-by-step approach to get you familiarized with everything from the basic terms, board components, and development environments to developing real projects. Each project will demonstrate how to use specific board components and tools. Both Galileo and Galileo Gen 2 are covered in this book.

Who is this book for?

What you will learn

Understand the concept of the Internet of Things

Wire and power a Galileo board safely

Develop code using the Arduino IDE, Intel IoT Dev Kit, and Intel XDK environments

Build and start a Galileo board from a bootable image

Use the Internet to feed, control, and gather data from sensors

Create connected modules

Combine multiple sensors to build complex projects

What do you get with Print?

Instant access to your digital copy whilst your Print order is Shipped

Paperback book shipped to your preferred address

Redeem a companion digital copy on all Print orders

Access this title in our online reader with advanced features

DRM FREE - Read whenever, wherever and however you want

Frequently bought together

€36.99

€36.99

€24.99

Total € 98.97

Arkadiusz Malinowski Aug 23, 2015

Book „Internet of Things with Intel Galileo” by Miguel de Sousa in my opinion is very good introductory book to the new incoming revolution in semicon industry which is Internet of Things. Book starts with short explanation of the idea standing behind of concept Internet of Things followed by a description of Intel Galileo board and comparison to Raspberry Pi. Next it quickly jumps to hands-on. Following chapters are devoted to setting up board, installing software, and running projects. Projects such as building an irrigation system and Christmas light effects which is quite ok for beginning from my point of view. Descriptions are clear and supported by pictures and screen-shots. Book length is I would say very encouraging to read it. I was always scared and overwhelmed by holding 1000-page bricks in my hand. Definitely I can recommend this book to those ones who want to start their adventure with Internet of Things.

Amazon Verified review

Eduardo Pinheiro Jul 29, 2015

This is the kind of books that I love. It's theoretical enough and practical as I like. In then end, I can build things on my own. Loved it!

Krishnath Poologanathan Oct 08, 2015

Interesting overall view of the internet of things. Its a very good start and A must read book if you are contemplating a IOT project

Internet of things with Intel Galileo: Employ the Intel Galileo board to design a world of smarter technology for your home

What do you get with Print?

Internet of things with Intel Galileo

Chapter 1. Introducing Galileo

The Internet of Things vision

Introducing Intel Galileo

Galileo Gen 2

A comparison of Galileo with the most popular boards

Summary

Page 1 of 6

Description

Who is this book for?

What you will learn

Product Details

What do you get with Print?

Product Details

Frequently bought together

Table of Contents

Recommendations for you

Customer reviews

People who bought this also bought

About the author

FAQs

Internet of things with Intel Galileo: Employ the Intel Galileo board to design a world of smarter technology for your home

What do you get with Print?

Contact Details

Shipping Address

Billing Address

Description

Who is this book for?

What you will learn

Product Details

What do you get with Print?

Contact Details

Shipping Address

Billing Address

Product Details

Packt Subscriptions

Frequently bought together

Table of Contents

Recommendations for you

Customer reviews

People who bought this also bought

About the author

FAQs