Packt+ | Advance your knowledge in tech

You're reading from Mastering ROS for Robotics Programming Design, build, and simulate complex robots using the Robot Operating System

Product type Paperback

Published in Feb 2018

Publisher Packt

ISBN-13 9781788478953

Length 580 pages

Edition 2nd Edition

Languages

C++

Tools

ROS

Concepts

Design

Authors (2):

Lentin Joseph

Jonathan Cacace

View More author details

Table of Contents (17) Chapters

Preface

1. Introduction to ROS FREE CHAPTER

2. Getting Started with ROS Programming

3. Working with 3D Robot Modeling in ROS

4. Simulating Robots Using ROS and Gazebo

5. Simulating Robots Using ROS and V-REP

6. Using the ROS MoveIt! and Navigation Stack

7. Working with pluginlib, Nodelets, and Gazebo Plugins

8. Writing ROS Controllers and Visualization Plugins

9. Interfacing I/O Boards, Sensors, and Actuators to ROS

10. Programming Vision Sensors Using ROS, Open CV, and PCL

11. Building and Interfacing Differential Drive Mobile Robot Hardware in ROS

12. Exploring the Advanced Capabilities of ROS-MoveIt!

13. Using ROS in MATLAB and Simulink

14. ROS for Industrial Robots

15. Troubleshooting and Best Practices in ROS

16. Other Books You May Enjoy

Leave a review - let other readers know what you think

Generating MoveIt! configuration package using the Setup Assistant tool

The MoveIt! Setup Assistant is a graphical user interface for configuring any robot to MoveIt!. Basically, this tool generates SRDF, configuration files, launch files, and scripts generating from the robot URDF model, which is required to configure the move_group node.

The SRDF file contains details about the arm joints, end-effector joints, virtual joints, and the collision link pairs, which are configured during the MoveIt! configuration process using the Setup Assistant tool.

The configuration file contains details about the kinematic solvers, joint limits, controllers, and so on, which are also configured and saved during the configuration process.

Using the generated configuration package of the robot, we can work with motion planning in RViz without the presence of a real robot or simulation interface.

Let's start the configuration wizard, and we can see the step-by-step procedure to build the configuration package...