Time for action – setting up the AP with FreeRADIUS-WPE
Follow these instructions to get started:
Connect one of the LAN ports of the access point to the Ethernet port on your machine running Kali. In our case, the interface is
eth0
. Bring up the interface and get an IP address by running DHCP, as shown in the following screenshot:Login to the access point and set the security mode to
WPA/WPA2-Enterprise
, set Version toWPA2
, Encryption toAES
. Then, under theEAP (802.1x)
section, enter the Radius Server IP address as your Kali build's IP address. The Radius Password will betest
, as shown in the following screenshot:Let's now open a new terminal and go to the directory
/usr/local/etc/raddb
. This is where all the FreeRADIUS-WPE configuration files are:Let's open
eap.conf
. You will find that thedefault_eap_type
command is set toMD5
. Let's change this topeap
:Let's open
clients.conf
. This is where we define the allowed list of clients that can connect to our Radius server. Interestingly...