You're reading from Building a Home Security System with Raspberry Pi Build your own sophisticated modular home security system using the popular Raspberry Pi board

Product type Paperback

Published in Dec 2015

Publisher

ISBN-13 9781782175278

Length 190 pages

Edition 1st Edition

Tools

Raspberry Pi

Concepts

Single Board Computers

Author (1):

Matthew Poole

View More author details

Table of Contents (11) Chapters

Preface

1. Setting Up Your Raspberry Pi

2. Connecting Things to Your Pi with GPIO FREE CHAPTER

3. Extending Your Pi to Connect More Things

4. Adding a Magnetic Contact Sensor

5. Adding a Passive Infrared Motion Sensor

6. Adding Cameras to Our Security System

7. Building a Web-Based Control Panel

8. A Miscellany of Things

9. Putting It All Together

Index

Which flavor of Pi?

Since the Raspberry Pi was released in 2012, there have been several versions of the mini-PC board released. I'll go though each of the versions released with their respective features so that you can choose which one is suitable for your particular project.

The good news is that it doesn't really matter which version you use in terms of power, as our home security system doesn't necessarily need loads of processing power, depending on what you want your system to do, of course). You might have an older board kicking about that will work for you.

The other piece of good news is that the GPIO interface pin layouts are the same across all the versions. The later versions have more pins, but the original 26 pins still remain in the same place.

The latest Raspberry Pi Version 2

Raspberry Pi Model A

The baby of the family is the Model A; it was released as a lower-cost version of the Model B, shown in the following section. Its main differences from the Model B are that it features just 256Mb of memory and has no Ethernet port; so if you want to connect this board to a network, you are limited to using a USB Wi-Fi dongle.

The Raspberry Pi Model A Board Layout

Raspberry Pi Model B

This was the first version of Raspberry Pi to be released; an updated revision, which improved the power system and USB port protection, came later. It features 512Mb of memory and has an Ethernet port for connecting to your network. This is probably the most common version used, and having the Ethernet port is incredibly useful, especially to get up and run quickly in order to set up and configure your Pi without the need for a keyboard and monitor.

The Raspberry Pi Model B Layout

Raspberry Pi Model B+ and Model 2

In 2014, the Raspberry Pi Foundation released a new version of the board that had some fundamental changes as compared to the previous version. The most fundamental changes were the board layout, form factor, and mounting points—much to the dismay of the many enclosure and accessory manufacturers out there.

In fact, we were in the middle of prototyping an enclosure for a commercial product that we were developing based on the Raspberry Pi—fortunately we caught wind of the board change in the nick of time and were able to change our enclosure to support the upcoming model B+.

The main electronic changes to this board are the addition of 2 more USB ports that can deliver more power to peripherals, an expanded GPIO interface, and the removal of the composite video port that is now consolidated into the audio jack. It also now uses a micro SD card with a better card slot.

In February 2015, a more powerful Raspberry Pi was released: the Raspberry Pi Model 2. It's similar to the Model B+ in terms of form-factor and interfaces, but is now reportedly 6-times faster than the Model B/B+ with its upgraded ARM processor and 1Gb of memory.

At the same low cost of less than £30, it's a fantastic little board and a great power-house for embedded systems.

The Raspberry Pi Model B+ and Model 2 Layout

Model comparison table

	Model A	Model B	Model B+	Version 2
Processor	ARM1176JZF-S 700 MHz processor, VideoCore IV GPU			Quad-core ARM Cortex-A7 CPU and a VideoCore IV dual-core GPU
Memory	256Kb	512Kb	512Kb	1Gb
USB Ports	2	2	4	4
Ethernet	No	Yes	Yes	Yes
No.GPIO Pins	26	26	40	40
Storage	SD Card	SD Card	Micro SD Card	Micro SD Card

So which one?

Essentially, any version of the Raspberry Pi will work with the modules presented in this book, but if you want to exploit features such as the camera, which may require more processing power and memory, or want to have an Ethernet connection, you'll need to use the Model B.

If you want to start plugging additional stuff into the USB port, such as a GSM modem, then I recommend that you use the Model B+ as it delivers more power to those kinds of devices without the need for additional USB hubs.

If you want to do more processing with video and images from an attached camera, or want to connect lots of things, then go for the latest Model 2 board. I'm going to assume that's the one you have chosen for this project, and that's the one I'll be using throughout this book; just be aware of any limitations if you choose to use an earlier model.