It's time to show the configuration for each router to include the administrative commands, so you can follow along with your simulator or live equipment.
The topology you know already is three routers connected through serial cables or smart serials, since we are using WIC2T as the WAN side. Also, we will be using three L2 switches of 2960-s, two PCs, and one server acting as an FTP server for now. The following is the IP scheme of the network:
- R1
- S0/0/0: 10.1.1.5/30
- F0/0: 192.168.1.254/24
- R2
- S0/0/1: 10.1.1.6/30
- S0/0/0: 10.1.1.9/30
- F0/0: 192.168.2.0/24
- R3
- S0/0/1: 10.1.1.10/30
- F0/0: 192.168.3.254
When you are configuring this interface with the IP addresses, the clock rate will always go on the S0/0/0 and you could also add a description to the interface, that way you know who your router is connecting to.
Let's start configuring...
