17
Wi-Fi and the Cloud
- Parts You'll Need for This Chapter
- Adafruit Feather M0 Wi-Fi w/ATWINC1500 (soldered w/ PCB antenna)
- USB cable (Type A to Micro-B)
- Half-size or full-size breadboard
- Assorted jumper wires
- 220Ω resistors (×4)
- 4.7kΩ resistors (×2)
- 5 mm common-anode RGB LED
- Piezo buzzer
- 5V 1A USB port wall power supply (optional)
- 4-digit 7-segment display with I2C backpack (1.2 inch or 0.56 inch, any color)
- Wi-Fi network credentials (and optionally, router administrator access)
- CODE AND DIGITAL CONTENT FOR THIS CHAPTER
- Code downloads, videos, and other digital content for this chapter can be found at:
exploringarduino.com/content2/ch17- Code for this chapter can also be obtained from the “Downloads” tab on this book's Wiley web page:
wiley.com/go/exploringarduino2e
This is it, the final frontier (and chapter). Short of launching your Arduino into space, connecting it to the internet is probably the closest that you will get to making the...
