Search icon CANCEL
Subscription
0
Cart icon
Your Cart (0 item)
Close icon
You have no products in your basket yet
Arrow left icon
Explore Products
Best Sellers
New Releases
Books
Videos
Audiobooks
Learning Hub
Conferences
Free Learning
Arrow right icon

Getting Started with Microsoft Fabric

Save for later
  • 7 min read
  • 11 Sep 2023

article-image

This article is an excerpt from the book, Learn Microsoft Fabric, by Arshad Ali and Bradley Schacht. A step-by-step guide to harness the power of Microsoft Fabric in developing data analytics solutions for various use cases.

Introduction

In this article, you will learn about enabling Microsoft Fabric in an existing Power BI tenant or create a new one Fabric tenant if you don’t have one already. Next, you will create your first Fabric workspace, which you will use to carry out all subsequent chapters' exercises.  

Enabling Microsoft Fabric 

Microsoft Fabric shares the same Power BI tenant. If you have a Power BI or Microsoft Fabric tenant already created, you have these two options, mentioned next, to enable Fabric (more at https://learn.microsoft.com/en-us/fabric/admin/fabric-switch) in that tenant. For each of these options, depending on the configuration you select, Microsoft Fabric becomes available for either everyone in the tenant, or to a selected group of users. 

Note: If you are new to Power BI or your organization doesn't have a Power BI/Fabric tenant (https://aka.ms/try-fabric) yet, you can set it up and use a Fabric trial by visiting to sign up for a Power BI free license. Afterward, you can start the Fabric trial, as mentioned later in this section while discussing trial capacity. Fabric trial includes access to the Fabric product experiences and the resources to create and host Fabric items. As of this writing, the Fabric Trial license allows you to work with Fabric for 60 days free. At that point, you will need to provision Fabric Capacity to continue using Microsoft Fabric.

Enable Fabric at the tenant level: If you have admin privileges, you can access the Admin center from the Settings menu in the upper right corner of the Power BI service. From here, you enable Fabric on the Tenant settings page. When you enable Microsoft Fabric using the tenant setting, users can create Fabric items in that tenant. For that, navigate to the Tenant settings page in the Admin portal page of the tenant, expand the Users can create Fabric items field and toggle the switch to enable or disable it, and then hit Apply.

 
getting-started-with-microsoft-fabric-img-0

Figure 2.1 – Microsoft Fabric - tenant settings 

  • Enable Fabric at the capacity level: While it is recommended to enable 

Microsoft Fabric for the entire organization at the tenant level, there are times when you would like it to be enabled for a certain group of people at the capacity level. For that, on the Tenant Admin portal, please navigate to the Capacity settings page, identify and select the capacity for which you want Microsoft Fabric to be enabled, and then click on the Delegate tenant settings tab at the top. Then under the Microsoft Fabric section of this page, expand the Users can create Fabric items setting and toggle the switch to enable or disable it, and then hit Apply

getting-started-with-microsoft-fabric-img-1

Figure 2.2 – Microsoft Fabric - capacity settings 

In both these above scenarios, it assumes you have paid capacity already available. However, if you don’t have it yet, you can use Fabric Trial (more at 
https://learn.microsoft.com/en-us/fabric/get-started/fabric-trial) for creating Fabric items for a certain duration if you want to learn or test the functionalities of Microsoft Fabric. For that, open the Fabric homepage (by visiting https://app.fabric.microsoft.com/home) and select Account Manager. In the Account Manager, click on Start Trial and follow the wizard instructions to enable Fabric trial with trial capacity. 

Note: For you to learn and try out different capabilities in Fabric, Microsoft provides free trial capacity. With this trial capacity, you get full access to all the Fabric workloads or, its features, including the ability to create Fabric items, and collaborate with others as well OneLake storage up to 1 TB. However, the usage of trial capacity is intended for trial and testing only and not for production usage        

Checking your access to Microsoft Fabric 

To validate if Fabric is enabled and you have access to it in your organization's tenant, sign in to Power BI and look for the Power BI icon at the bottom left of the screen. If you see the Power BI icon, select to see the experiences available within Fabric. 

getting-started-with-microsoft-fabric-img-2

Figure 2.3 – Microsoft Fabric - workloads switcher 

If the icon is present, you can click Microsoft Fabric link at the top the screen (as shown in Figure 2.3) to switch to Fabric experience or click on individual experience you want to switch to. 

getting-started-with-microsoft-fabric-img-3

Unlock access to the largest independent learning library in Tech for FREE!
Get unlimited access to 7500+ expert-authored eBooks and video courses covering every tech area you can think of.
Renews at R$50/month. Cancel anytime

Figure 2.4 – Microsoft Fabric - home page 

However, if the icon isn't present, Fabric is not available to you. In that case, please follow the steps (or work with your Power BI or Fabric admin) mentioned in the previous section to enable it. 

Creating your first Fabric enabled workspace 

Once you have confirmed that Fabric is enabled in your tenant and you have access to it, the next step is to create your Fabric workspace. You can think of a Fabric workspace as a logical container that will contain all the items such as lakehouses, warehouse, notebooks, and pipelines. Follow these steps to create your first Fabric workspace: 
1. Sign in to Power BI (https://app.powerbi.com/). 
2. Select Workspaces | + New workspace

getting-started-with-microsoft-fabric-img-4

Figure 2.5 – Create a new workspace 

3.   Fill out the Create a workspace form as follows: 

o   Name: Enter Learn Microsoft Fabric and some characters for uniqueness 

o   Description: Optionally, enter a description for the workspace 

 getting-started-with-microsoft-fabric-img-5

Figure 2.6 – Create new workspace - details 

o    Advanced: Select Fabric capacity under License mode and then choose a capacity you have access to. If not, you can start a trial license, as described earlier, and use it here. 
4.    Select Apply. The workspace will be created and opened. 
5.    You can click on Workspaces again and then search for your workspace by typing its name in the search box. You can also pin the selected workspace so that it always appears at the top. 

 getting-started-with-microsoft-fabric-img-6

Figure 2.7 – Search for a workspace 

6. Clicking on the name of the workspace will open the workspace and its link will be available in the left side navigation bar, allowing you to switch from one item to others quickly. Currently, since we haven’t created anything yet, there is nothing here. You can click on +New to start creating Fabric items. 

 getting-started-with-microsoft-fabric-img-7

Figure 2.8 – Switch to a workspace 

With a Microsoft Fabric workspace set up, let’s review the different workloads available.

Conclusion

In this article, we covered the basics of Microsoft Fabric in Power BI. You can enable Fabric at the tenant or capacity level, with a trial option available for newcomers. To check your access, look for the Power BI icon. If present, you're ready to use Fabric; if not, follow the setup steps. Create a Fabric workspace to manage items like lakehouses and pipelines. This article offers a quick guide to kickstart your journey with Microsoft Fabric in Power BI.

Author Bio

Arshad Ali is a Principal Program Manager on the Microsoft Fabric product team based in Redmond, WA. As part of his role at Microsoft, he works with strategic customers, partners, and ISVs to help them adopt Microsoft Fabric in solving their complex data analytics problems and driving business insights as well as helps shape the future of the Microsoft Fabric.

Bradley Schacht is a Principal Program Manager on the Microsoft Fabric product team based in Jacksonville, FL. As part of his role at Microsoft, Bradley works directly with customers to solve some of their most complex data warehousing problems and helps shape the future of the Microsoft Fabric cloud service.