Introduction

In the last chapter, we used the audio codec's beep generator to play a tune, but if you looked at the codec manufacturer's data sheet, you must have noticed that the device can do much more. Audio signals can be recorded by connecting a microphone to the evaluation board's stereo analog audio input, and the signal can be sampled using the audio codec's on-chip ADC. Digital audio can be played by sending digital samples to the codec, and the left and right speakers can be driven by the output of an on-chip DAC. A dedicated digital serial audio interface using a protocol called I2S (I2S, or IIS) conveys digital samples between the microcontroller and audio codec. Inter-IC-Sound (I2S) or Integrated Interchip Sound (IIS) is a serial bus interface standard developed by Phillips Semiconductors in 1986 (revised 1996) that is used to connect digital audio devices together. This specification is widely available online (for example, www.cypress.com). Unfortunately, the STM32F400 evaluation...