You're reading from Learn Robotics Programming Build and control AI-enabled autonomous robots using the Raspberry Pi and Python

Product type Paperback

Published in Feb 2021

Publisher Packt

ISBN-13 9781839218804

Length 602 pages

Edition 2nd Edition

Languages

Python

Tools

Raspberry Pi

Concepts

Robotics

Author (1):

Danny Staple

Preface

1. Section 1: The Basics – Preparing for Robotics

2. Chapter 1: Introduction to Robotics FREE CHAPTER

3. Chapter 2: Exploring Robot Building Blocks – Code and Electronics

4. Chapter 3: Exploring the Raspberry Pi

5. Chapter 4: Preparing a Headless Raspberry Pi for a Robot

6. Chapter 5: Backing Up the Code with Git and SD Card Copies

7. Section 2: Building an Autonomous Robot – Connecting Sensors and Motors to a Raspberry Pi

8. Chapter 6: Building Robot Basics – Wheels, Power, and Wiring

9. Chapter 7: Drive and Turn – Moving Motors with Python

10. Chapter 8: Programming Distance Sensors with Python

11. Chapter 9: Programming RGB Strips in Python

12. Chapter 10: Using Python to Control Servo Motors

13. Chapter 11: Programming Encoders with Python

14. Chapter 12: IMU Programming with Python

15. Section 3: Hearing and Seeing – Giving a Robot Intelligent Sensors

16. Chapter 13: Robot Vision – Using a Pi Camera and OpenCV

17. Chapter 14: Line-Following with a Camera in Python

18. Chapter 15: Voice Communication with a Robot Using Mycroft

19. Chapter 16: Diving Deeper with the IMU

20. Chapter 17: Controlling the Robot with a Phone and Python

21. Section 4: Taking Robotics Further

22. Chapter 18: Taking Your Robot Programming Skills Further

23. Chapter 19: Planning Your Next Robot Project – Putting It All Together

24. Other Books You May Enjoy

Technical requirements

To complete the exercises in this chapter, you will require the following:

A Raspberry Pi, preferably a 3A+ (but a Pi 3 or 4 will do)
A USB power supply capable of 2.1 amps with a Micro-USB cable
The MicroSD card you prepared in the previous chapter
A Windows, Linux, or macOS computer connected to the internet and able to read/write to SD cards
A text editor on your computer – VS Code is a suitable multiplatform option
PuTTY software on Windows (SSH software is already available on Mac and Linux desktops)

The GitHub link for the code is as follows:

Check out the following video to see the Code in Action: https://bit.ly/3bErI1I